E-type tubular terminal
Material:
Copper device wire clip (74 set)
Model | Adaptation wire (mm²) | Main dimensions(mm) | |||
A | B | L1 | L | ||
ST-1 (single hole) | 35~50 | 40 | 4.5 | 65 | 120 |
ST-2 (single hole) | 70~95 | 40 | 4.5 | 80 | 136 |
ST-3 (dual-hole) | 35~50 | 40 | 4.8 | 65 | 145 |
ST-4 (dual-hole) | 70~95 | 40 | 4.8 | 80 | 175 |
ST-5 (dual-hole) | 120~150 | 50 | 5.5 | 125 | 225 |
ST-6 (dual-hole) | 185~240 | 50 | 5.5 | 125 | 225 |
ST-7 (four holes) | 120~150 | 80 | 5.5 | 125 | 240 |
ST-8 (four holes) | 185~240 | 80 | 5.5 | 125 | 240 |
Installation method:
1. Use the corresponding product model according to the wire specifications;
2. Mix the copper equipment line clamping the copper equipment lines according to the connected equipment of the device;
3. Clean the surface of the wire before the wire installation. The surface of the device terminal board and the aluminum equipment wire clip should be removed;
4. Insert the wire into the wire slot of the device cable, and the wire is tightened by crossing the nut;
5. Finally, the device’s device terminal board and the copper device thread clip are coordinated by bolt.
If you are interested in joining us, please leave your information here,
we will contact you as soon as possible.